Ktm 250 Xc-W

Pulse IPT P.4 210 Cranking AMPS Replaces YTX4L-BS, YTZ5S

Pulse IPT P.7 210 Cranking AMPS Replaces YTX7L-BS, YTX5L-BS, YTZ7S

Pulse IPT P.7S 420 Cranking AMPS Replaces YTX7L-BS, YTX5L-BS, YTZ7S
For Super quick starting!

Fork Dust Seals WP/48mm/MX/Genuine WP pair

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

48mmx12mmx2.0mm/Genuine WP

111-330-040 WP Front Fork Lowering kit XPLOR with 23mm cartridge  less 30mm over all length
Replaces original fork fork spring seat and inner collar providing 30 mm lower than standard height.
Maintains clearance between wheel and under fender
Retains use of original spring dimensions / shorter spring not required!

 

48mmx58mmx9.5mm/MX USD/Pair/Genuine NOK/Pair

Fits 48mm Front Forks/48.70mmx20mmx1.0mm/Pair

48mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

111-030-030O  (WP) ORANGE - PAIR

WP 48mm Open Cartridge, 3.8N-5.0N 2013-2016   priced individually/ (Minimum order qty 2)

KX450F 07-14, YZF450 10-15, WP 4CS, 4.0N-5.2N 2007-2014 / priced individually/ (Minimum order qty 2)

435-420 XPLOR FF  shortened 50mm / 3.8N -4.4N Includes lowering spacers

435-445  XPLOR FF  Shortened 25mm includes spacers

SPACER-FF-430*  43mm Spacer available in (43x35x2mm) -Black / (43x35x3mm)-Red / (43x35x5mm)-Grey

113-010-035  Fork Top Cap Spanner Wrench 4 Pin WP  4860/4CS/ Ohlins R&T
4 x 3.5mm pins on 38mm centers with 31mm center bore

113-010-032  Front Fork Top Cap Spanner WP 50mm

SDERLWXPL  XPLOR Shock Lowering Washer Available in  2mm, 6.5mm, 16mm / each spacer lowers seat height roughly 3x the shock length shortened