Ktm 85 Sx

DSS-011 WP 43MM -**NOT NOK** Pair  43x53.4x11.8/5.8 mm

K-Tech Suspensions Factory approved fork Fluid for all K-Tech  Fork Products -Motul Factory Line 5 wt  1 liter

Specially formulated for SHOWA, KAYABA, OHLINS, WP forks, and any type of upside/down or
conventional telescopic fork.
Reduced internal friction, specially fork tubes and seals thanks to the exclusive anti-friction additive designed and developed by MOTUL.
Outstanding suspension performance 
High performance anti-foam avoiding air transfer to the air chamber to maintain suspension
performance.
Anti-wear and extreme pressure properties. Anti-corrosion. Seals protection.
Properties:
Density at 20C  ASTM D1298  0.834 
Viscosity at 40C  ASTM D445  18.0 mm/s 
Viscosity at 100C  ASTM D445  4.0 mm/s
Viscosity Index  ASTM D2270  121 
Flash point  ASTM D92  208C
Pour point  ASTM D97  <-39C 

FF GUIDE BUSH** PAIR 43x12x2.00

43mmx53mmx9.5mm/MX USD/Genuine NOK /Pair

Fits 44mm Front Forks/43.70mmx20mmx1.0mm/Pair

43mm ID Universal Low Friction Requires Fork Disassembly For Installation SOLD EACH

111-030-030O  (WP) ORANGE - PAIR

#385-580  WP AER43 with ORSS Conversion  / CRF250L 16-20 (std rate=7.5N) / CRF250 Rally 17-20  (std rate=6.7N) Sold each

SX85 09> WP, 2.6N-4.0N 2009-2017  priced individually/ (Minimum order qty 2)

SX85 04-2008 WP, 2.6N-4.0N 2004-2008   priced individually/ (Minimum order qty 2)

113-010-035  Fork Top Cap Spanner Wrench 4 Pin WP  4860/4CS/ Ohlins R&T
4 x 3.5mm pins on 38mm centers with 31mm center bore

113-010-060  Front Fork Top Cap Spanner 45mm (WP 85SX)

113-075-037 Front Fork Cartridge Tube Clamp 37mm (Two Piece)

117-600-023-004  FF PISTON KIT ORVS WP 4860 MXMA 43MM 2017>

PB-460810  Shock Absorber Piston Bush (46x8.00x1.00) -WP

PB-4613125 RCU Piston Bush WP XPlor 46x13x.00x1.25

211-205-058 WP 58mm Reservoir Gassing Valve Assembly

Greatly simplifies WP rear shock reservoir filling
Schrader type filler adapter eliminates need for special WP tooling

211-205-005 WP Shocks Needle Gassing valve filler M5x0.8P